primaDURA GLOW approved - NovaDura

primaDURA GLOW stove finished 3mm aluminium wayfinding signage is tested and approved at Warrington Exova to to BS 476-6:1989+A1:2009 (Class O) and BS 476-7 :1997 (Class 1)

A Class 1 classification is assigned by testing in accordance with BS 476 : Part 7 : 1997. This specifies a method of test for measuring the lateral spread of flame along the surface of a specimen of a product orientated in the vertical position. A Class 1
classification is the best of four performance levels defined within the Standard

A Class 0 classification is assigned to Class 1 products which have a fire propagation index (I) of not more than 12 and a sub-index (i1) of not more than 6 when tested in accordance with BS 476 : Part 6 : 1989. This test takes account of the combined effect
of factors such as the ignition characteristics, the amount and the rate of heat release and the thermal properties of the product in relation to their ability to accelerate the rate of fire growth.

Properties:

Delivering durability and photoluminescent performance to the highest specification, provides superior performance egress signage for residential, industrial and commercial signage or wayfinding applications.

Furthermore, the PSPA Class D photoluminescent coating is third party accredited, tested for Lloyd’s Register MED approval certification for both marine & offshore applications with respect to safety signs and egress route low level lighting.

Now you may think,’ if my fire sign is going up in smoke, I seriously don’t want to be in the building!’

However, if your basic fire sign has been obliterated quickly, that certainly impedes the emergency services access & evacuation methods.

primaDURA GLOW stays brighter and remains legible for longer, and is far more durable in any fire or power-outage situation. There has been increasing demand as local authorities and housing associations seek to improve the reliability, efficiency and performance of emergency egress & safety way guidance systems.

Applications:

Emergency Evacuation Plans & Floor Level Markers

Depth Gauge Board  – level monitoring in dusk/dark conditions

Additional Standards

Class D primaDURA GLOW meets a range of international safety standards and Test methods, including:

• PSPA Class D according to DIN 67510 Pt 1
• Extremely bright afterglow for many hours to facilitate efficient egress & evacuation by The Fire & Rescue Service
• ISO 15370 (International Standards Organization)
• IMO RES A. 752 (18) (International Maritime Organization)
• SOLAS Regulations
• EU Marine Equipment Directive
• ASTM 2072 (American Society for Testing and Materials)
• JIS Z9100 (Japanese Industrial Standard)
• NYC RS6-1 (New York City Standard)

Resistant to UV, salt spray corrosion/erosion or deserts and storms

• ASTM G154 500 Hrs. QUVB Accelerated Ageing for Gloss Retention & Colour Fastness
• EN ISO 2810:2004 for Weathering Resistance
• Service Temperature -40°C – +90°C UV & Frost Resistant
• Ideal for coastal locations
• Harbour Depth Boards/Depth Gauges in low level lighting or dusk conditions
• Maritime signage (meets IMO/SOLAS regulations)
• Meets durability standards with respect to impact & scratch according to BS 3900-0:2010

Legible for longer in fire situations

• Reaction to Fire BS EN 13501-2 :2016 – complies with the requirements Classes B, dO,
• Passes BS 476-6:1989+A1:2009 (Class O) and BS 476-7 :1997 (Class 1) for Surface Spread of Flame and Fire Propagation

Resistant to acids, alkalis & bleaching

• acid, alkali resistant
• Can also be used in clean rooms disinfected with peroxide-bombing

Contact

Please contact us at info@novadura.com for further information or +44 (0)1282 867 390 for a chat about available options or any of the detail above.